Hampton Optimize Reagents

Hampton Optimize Reagents

1、Optimize – Polymers

Crystallization grade polymers for formulating screens or optimization

2、Optimize – Organics (Volatile)

Crystallization grade organics (volatile) for formulating screens or optimization

3、Optimize – Organics (Non-Volatile)

Crystallization grade organics (non-volatile) for formulating screens or optimization

4、Optimize – Salts

Crystallization grade salts for formulating screens or optimization

5、Optimize – Buffers

Crystallization grade buffers for formulating screens or optimization

6、Optimize – Solubilizing Agents (NDSB)

Crystallization grade non detergent sulfobetaines

7、Optimize – Reducing Agent

TCEP Hydrochloride

8、Optimize – Monoolein

LCP – Lipidic Cubic Phase

9、Optimize – Cryoprotectants

For cryoprotection of crystals

10、Optimize – Oils for Crystallization

Microbatch crystallization & oil layering

11、Optimize – Izit Crystal Dye

Izit™ color dye to differentiate protein crystals from salt crystals

Hampton 膜蛋白结晶试剂 MembFac • Crystal Screen Lite • MembFac HT

Hampton  MembFac • Crystal Screen Lite • MembFac HT

Applications

Primary sparse matrix crystallization screen for membrane proteins and samples with limited solubility   膜蛋白和样品溶解度有限样品

Features

  Membrane protein sparse matrix screens

  Sparse matrix formula efficiently samples salts, polymers, organics and pH

  pH range 4.6 – 8.5

  Formulated for use with detergents

   Tube or Deep Well block format

   Crystal Screen Lite features a lower ionic strength than the original Crystal Screen

Description
MembFac is a highly effective sparse matrix screen specifically designed as a preliminary screen for the crystallization of membrane proteins. MembFac is based upon the highly effective biased sparse matrix methodology. The MembFac screen matrix is optimized for the crystallization of membrane proteins.

MembFac contains 48 unique reagent formulations. With this set of 48 conditions, numerous chemicals and chemical combinations are utilized, allowing one to evaluate a large variety of potential crystallization conditions. MembFac covers a broad pH range between 4 and 9.

The Rationale
The basic rationale of MembFac is to perform a sparse matrix screen while changing the detergent dimension because detergents play an important factor in the crystallization of membrane proteins. A MembFac screen is to be completed for each detergent. Detergent screens are available separately.

The Method
The membrane protein of interest is first isolated in the detergent which gives the highest stability and activity. The protein concentration should be approximately 10 to 20 mg/ml and the detergent concentration should be only slightly above the CMC. The sample is then set against MembFac, using all 48 solutions plus the screening detergent(s) of choice. The screening detergent concentration should be approximately one to three times the CMC. Hence, for each detergent screened, one would utilize approximately 1 to 2 mg of sample.

The MembFac protocol was used to crystallize membrane proteins including SQR, fumerate: quinone oxireductase, LHII, and LHCII.

Crystal Screen Lite is a sparse matrix of trial crystallization reagent conditions based upon the Crystal Screen™.3 The primary screen variables are salt, pH, and precipitant (salts, polymers, volatile organics, and non-volatile organics).2Crystal Screen Lite differs from the original Crystal Screen kit in that the primary precipitant reagents are one-half the concentration of that used in the original Crystal Screen formulation. The secondary salts, ions, and buffers remain at the original Crystal Screen concentration. Reducing the primary concentration of the primary precipitant results in a screen which is “more gentle” on the sample and typically produces much less precipitate conditions than the original Crystal Screen.

MembFac contains 48 unique reagents, 10 ml each.

MembFac HT contains 1 ml each of all 48 reagents from MembFac and reagents 1-48 from Crystal Screen Lite in a single Deep Well block format.

Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

CAT NO NAME DESCRIPTION
HR2-114 MembFac 10 ml, tube format
HR2-128 Crystal Screen Lite 10 ml, tube format
HR2-137 MembFac HT 1 ml, Deep Well block format

Hampton结晶用缓冲盐试剂盒– SaltRx

Hampton结晶用缓冲盐试剂盒– SaltRx

SaltRx 1 • SaltRx 2 • SaltRx HT

Applications

Primary or secondary, salt and pH matrix crystallization screen for biological macromolecules

Features

Salt versus pH matrix crystallization screen
Samples pH 4 to 9
22 unique salts versus salt concentration and pH
Compatible with microbatch, vapor diffusion, liquid & gel diffusion methods
Tube or Deep Well block format
Preformulated, ready to screen
Developed at Hampton Research
All salts and buffers in screen readily available as Optimize™ reagents for reproducing and optimizing crystals
Individual reagents available through the Hampton Research Custom Shop
 Description
SaltRx was developed by Hampton Research as a primary and secondary, salt and pH based crystallization screen for biological macromolecules. Salt is the only primary crystallization reagent (precipitant) utilized. Based on a design of 96 conditions, the screen evaluates a broad portfolio of crystallization salts of varying concentration and pH. The selection, concentration, and pH of the salts were determined by data mining the BMCD1 and other crystallization databases, crystallization reports in the literature, and internal crystallization trials performed at Hampton Research. Based on this analysis, up to 35% of protein crystallizations involve salt as the primary crystallization reagent. SaltRx can be used as a primary crystallization screen when salt, ionic strength and pH are desired or suspected as appropriate crystallization variables. It is also useful as a secondary screen when salt only reagents/conditions from screens such as Index™, Crystal Screen™, and Grid Screen™ produce crystals and when further screening for additional salt conditions or optimization is desired. Since this screen does not contain volatile organics, it is compatible with microbatch, vapor diffusion, liquid and gel diffusion crystallization methods. SaltRx may also be used for dialysis crystallization in conjunction with Dialysis Buttons™.The original SaltRx kit (HR2-108) contained 96 unique reagents, 10 ml each. This kit has been discontinued and converted into two 48 reagent based kits, SaltRx 1 and SaltRx 2, available separately, which when used together are identical to the original SaltRx.SaltRx 1 contains 48 unique reagents, 10 ml each. SaltRx 1 contains reagents 1-48 of the original SaltRx 96 reagent kit.Salt Rx 2 contains 48 unique reagents, 10 ml each. SaltRx 2 contains reagent 49-96 of the original SaltRx 96 reagent kit.SaltRx HT contains the 96 SaltRx 1 and SaltRx 2 reagents in a single Deep Well block format.Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

Measured pH range of kit is 4.1 to 9.0 at 25°C
Average measured pH of kit is 6.9 at 25°C
Median measured pH of kit is 7.3 at 25°C
Mode measured pH of kit is 7.4 at 25°C

CAT NO NAME DESCRIPTION
HR2-136 SaltRx HT 1 ml, Deep Well block format
HR2-107 SaltRx 1 10 ml, tube format
HR2-109 SaltRx 2 10 ml, tube format

Hampton Polyethylene glycol 4,000

Hampton Polyethylene glycol 4,000

Applications
Crystallization grade Polyethylene glycol for formulating screens or for optimizatio
Features
Sterile filtered solution
Formulated in Type 1+ ultrapure water: 18.2 megaohm-cm resistivity at 25°C, < 5 ppb Total Organic Carbon, bacteria free (<1 Bacteria (CFU/ml)), pyrogen free (<0.03 Endotoxin (EU/ml)), RNase-free (< 0.01 ng/mL) and DNase-free (< 4 pg/µL)

Description
Polyethylene glycol 4,000
Synonym: PEG 4,000
H(OCH2CH2)nOH
Mr 3,500-4,500
CAS Number [25322-68-3]
EC Number 500-038-2
Merck 14,7568
RTECS TQ3500000
MDL Number MFCD00081839
PubChem Substance ID 24890217
Melting point (Starting Material) 58.0-61.0°C
Aldehyde None detected
Peroxide None detected

HR2-529 Measured pH range: 6.9 – 9.5 at 25°C
HR2-529 Measured Conductivity Range: 35.3 – 46.9 µS/cm at 25°C
HR2-529 Measured Refractive Index Range: 1.40172 – 1.40279 at 20°C

CAT NO NAME DESCRIPTION
HR2-605 Polyethylene glycol 4,000 Flake – 500 g
HR2-529 Polyethylene glycol 4,000 50% w/v solution – 200 ml

Hampton Natrix • Natrix 2 • Natrix HT

Hampton Natrix • Natrix 2 • Natrix HT

Applications

  Primary biased sparse matrix crystallization screen for nucleic acids & protein/nucleic acid complexes  主要用于核酸和蛋白质/核酸复合物的删选

Features

Nucleic acid sparse matrix screen
Sparse matrix formulation efficiently samples salts, polyols, polymers, organics, additives & pH
pH range 5.6 – 8.5
Tube or Deep Well block format
 Description
Natrix, Natrix 2 and Natrix HT are based upon published reagent formulations for the crystallization of nucleic acids and protein-nucleic acid complexes. A variety of hammerhead ribozymes and other ribozymes, RNAs, DNAs, RNA-drug complexes, and RNA-protein complexes have been crystallized using the Natrix protocols.By using sparse matrix sampling technology, The Natrix kits allow one to quickly test wide ranges of pH, salts, and precipitants using a very small sample of nucleic acid.

Natrix screens are unique in that rather than relying solely on the traditional nucleic acid precipitant MPD, Natrix screens also utilize Polyethylene glycols (PEGs) in a variety of molecular weights (200, 400, 4,000, 8,000) as well as 2-Propanol, Polyethylene glycol monomethyl ether (PEG MME), and 1,6-Hexanediol. Many of the polymeric and low molecular weight organic precipitants are combined with various monovalent salts as precipitating agents. This combination of salts and low molecular weight organics and polyalcohols, as well as the utilization of varying chain length PEGs, has proven to be a successful combination for producing nucleic acid and protein-nucleic acid complex crystals.

Natrix contains 48 unique reagents, 10 ml each and is based on the sparse matrix formulation first described by William Scott in 1995.

Natrix 2, an extension of Natrix, contains 48 unique reagents, 10 ml each. Natrix 2 is a biased sparse matrix screen based on extracting patterns from crystallization data as well as reagent formulations first described by Berger et al in 1996.

Natrix HT contains 1 ml of each reagent from Natrix and Natrix 2 in a single Deep Well block format.

Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

Natrix • Natrix 2 • Natrix HT
Natrix • Natrix 2 • Natrix HT
View Full Size
Natrix • Natrix 2 • Natrix HT

 

CAT NO NAME DESCRIPTION
HR2-116 Natrix 10 ml, tube format
HR2-117 Natrix 2 10 ml, tube format
HR2-131 Natrix HT 1 ml, Deep Well block format

Hampton Solubility & Stability Screen

Hampton Solubility & Stability Screen

Solubility & Stability Screen(溶解度和稳定性的屏幕)

应用:溶解性和稳定性屏幕的设计,以协助识别解决方案的条件,促进蛋白质的溶解性和稳定性,并尽量减少蛋白质沉淀。

Solubility & Stability Screen

Solubility & Stability Screen

Solubility & Stability Screen

Solubility & Stability Screen HR2-072

Applications

A solubility screen, a stability screen, an additive screen for protein assays including ThermoFluor and crystallization
Preformulation screening

 

Compatible with Thermofluor , Differential Scanning Fluorimetry (DSF), and Protein Thermal Shift assays
96 sterile filtered reagents
17 classes of reagents and excipients
Highly concentrated (10x) reagent formulation
Developed at Hampton Research

Features

Methodologies

Thermal shift assay
Dynamic Light Scattering
Use Solubility & Stability Screen along side Slice pH and Solubility & Stability Screen 2 to optimize sample buffer
Description

Solubility & Stability Screen is designed to assist in the identification of solution conditions which promote protein solubility and stability, and minimize protein precipitation. Solubility & Stability Screen is a solubility screen, a stability screen, and may also be used as an additive screen in the presence of a crystallization reagent.

The Hampton Research Solubility and Stability Screen can evaluate protein solubility, stability and crystallization in the presence of 94 different chemical additives sampling 17 different classes of reagents plus two controls.

Protein solubility and stability are universally required in a wide range of applications, including general biochemical studies, the preparation of proteins in pharmaceuticals, structural biology and crystallization.1-11The preparation of a concentrated, soluble and stable protein sample can often be a difficult task as proteins often aggregate, precipitate or denature.

Thermofluor (also known as Differential Scanning Fluorimetry, DSF and Protein Thermal Shift) provides a rapid, convenient and effective means of identifying subsaturating solution conditions that may also correlate with protein heterogeneity and poor crystallization outcomes.12

Protein solubility and stability is affected by many different chemical factors including pH, buffer type, chemical additives and excipients. pH and buffer type are dominant protein solubility and stability variables and can be evaluated and optimized using the Hampton Research Slice pH kit HR2-070. Slice pH evaluates protein solubility, stability and crystallization versus 20 different buffers over the pH range 3.5-9.6. Chemical additives influencing protein solubility and stability can be evaluated using the Solubility & Stability Screen.

It is widely accepted that protein solubility and stability can be increased by the use of chemical additives.5,15Seventeen classes of reagents are sampled by the Solubility & Stability Screen and each of these classes has been reported as important in improving sample solubility and stability.2-11

The Solubility & Stability Screen is a set of 94 high purity reagents formulated in high purity water (NCCLS/ASTM Type 1+) at 25°C and are 0.22 micron sterile filtered. The 94 solubility and stability reagents are formulated at 2 to 10 times their recommended working concentration. The remaining two reagents are water and a negative (TCA) control. A water control demonstrates the effect of diluting sample as well as sample buffer concentration. TCA, the negative control, demonstrates total sample precipitation, loss of sample solubility and loss of sample stability. The effects of the Solubility & Stability reagents can be compared with this negative control to assist in the identification of reagents promoting sample solubility and stability. 500 microliters of each reagent is supplied in a sterile 96 well polypropylene Deep Well block. The Solubility & Stability Screen reagents are compatible with the sitting or hanging drop vapor diffusion, microbatch, free interface diffusion, sandwich drop vapor diffusion, and dialysis crystallization methods utilizing water soluble reagents.

Hampton PEGRx 聚乙二醇结晶试剂盒

Hampton PEGRx

PEGRx 1 • PEGRx 2 • PEGRx HT

Applications   主要是调节样本的PH值

  Primary and secondary, polymer and pH based crystallization screen for biological macromolecules

PEGRx is a primary and secondary, polymer and pH based crystallization screen developed at Hampton Research. It is designed to evaluate polymer based crystallization reagents and pH in low (PEGRx 1) to medium ionic strength (PEGRx 2). It is also designed for use as a secondary or optimization screen to follow the Hampton Research Index screen when polymer based reagents produce hits and interesting solubility leads.PEGRx 1 is a crystallization reagent kit designed to evaluate an array of polymers of varying molecular weight in a low ionic strength environment versus a wide range of pH. Polymer reagents include Polyethylene glycols, Polyethylene glycol monomethyl ethers, and Jeffamines®. The molecular weight range between 200 and 20,000 is evaluated in a low ionic strength formulation. Ten different buffers are used to span the range of pH between 3.5 and 9. The primary screen variables are polymer type, polymer molecular weight, pH and low ionic strength.

PEGRx 2 is a crystallization reagent kit designed to evaluate an array of polymers of varying molecular weight in a medium ionic strength environment in the presence of additives, salts, volatile organics and polyols versus a wide range of pH. Polymer reagents include Polyethylene glycols and Polyethylene glycol monomethyl ethers. The polymer molecular weight range between 200 and 20,000 is evaluated in a medium ionic strength formulation. Ten different buffers are used to span the range of pH between 3.5 and 9. The primary screen variables are polymer type, polymer molecular weight, pH and secondary reagents which include additives, salts, volatile organics and polyols.上海金畔生物作为Hampton蛋白结晶产品的代理商,竭诚为您服务,欢迎新老客户咨询。PEGRx 1 contains 48 unique reagents, 10 ml each.

PEGRx 2 contains 48 unique reagents, 10 ml each

PEGRx HT contains the 96 PEGRx 1 and PEGRx 2 reagent in a single Deep Well block format.

Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

PEGRx 1 • PEGRx 2 • PEGRx HT

PEGRx

PEGRx 1 • PEGRx 2 • PEGRx HT

DesR crystals grown using Hampton Research PEGRx, Jin Ho Moon, Korea University.

CAT NO NAME DESCRIPTION
HR2-082 PEGRx 1 10 ml, tube format
HR2-084 PEGRx 2 10 ml, tube format
HR2-086 PEGRx HT 1 ml, Deep Well block format

Hampton 48孔坐滴蛋白结晶板 48-Well Crystallization Plate

Hampton 48孔坐滴蛋白结晶板 48-Well Crystallization Plate
Applications

Sitting drop crystallization
Features

One drop per reservoir
SBS format
48 well plate
9 mm standard distance between wells
Drop volume: Up to 10 µl
Reservoir volume: 50 to 200 µl
Micro-numbering alongside drop volumes
Rigid plate structure
Wide partition walls between wells improve sealing
Developed in conjunction with the MRC Laboratory of Molecular Biology in Cambridge, United Kingdom
UV compatible (UVP)
Description
MRC Maxi 48-Well Crystallization Plate for Automated Optimization

The MRC Maxi optimization plate is a breakthrough for macromolecular crystallization presented in a 48 well format. Offering easy to automate crystallization optimization with large sitting-drops, the new MRC Maxi Crystallization plate is the perfect solution. Manufactured by Swissci AG, the plate offers an SBS format while providing 48 wells. MRC Maxi is intended for large drops and is compatible both with standard robotic systems as well as manual pipetting.

The plate was developed at the MRC Laboratory of Molecular Biology (Cambridge, UK) in collaboration with Jan Löwe and Fabrice Gorrec. It is a result of many years of experience in successful robotic high-throughput crystallization and complements the original MRC crystallization plate, which is intended for smaller drop volumes and higher throughput during screening.

Drop volumes of up to 10 µl are possible. The 9 mm standard distance between wells is preserved, enabling the use of multi-channel manual pipettes and robotic liquid handlers, making MRC Maxi one of the most automation-friendly optimization plates on the market.

MRC Maxi is covered by global intellectual property and design registration as are the Swissci AG MRC 2 lens 96 well plates. Several breakthrough features of the original MRC plate have been maintained. Wells are labeled individually. Drops are raised for easy access during crystal retrieval. MRC Maxi uses the same proprietary polymer specially selected for the purpose of UV light visualization and the material used keeps through-plastic evaporation to a minimum. Well shapes are spherical but shallow.

The MRC Maxi Crystallization plate offers unique properties that make it the ideal choice for microliter-sized optimization experiments and is made from UV compatible UVP.

The advantages of the MRC Maxi Crystallization plate – in brief

Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy.

Easy Viewing
The wells are wide conical.
Each well has a micro lens for perfect illumination.
Micro numbering readable under the microscope for each well.
The optically superior polymer (UVP) is UV transmissible.

Better Sealing
Wide partition walls between the wells give plenty of area for good sealing with tape.

Very Rigid, Automation-Friendly Plate Design
The UVP polymer reduces through-plastic evaporation to a minimum.

SBS Standard
The plates are designed to the SBS standard and are compatible with all common holders.
9 mm distance from well-to-well within columns, 18 mm distance within rows.

Unique Polymer (UVP)
Ultra-low sample binding.
No static charging.

Recommended Volumes
Volumes validated for MRC Maxi are up to 10 µl of sample drop and 200 µl of the crystallization reagent.

CAT NO NAME DESCRIPTION
HR3-179 MRC Maxi 48-Well Crystallization Plate 10 plate case
HR3-180 MRC Maxi 48-Well Crystallization Plate 40 plate case

Hampton 蛋白质结晶试剂和耗材介绍

特色

Hampton 蛋白质结晶试剂和耗材介绍

美国Hampton Research公司位于加利福尼亚州,是一家专门从事蛋白质晶体研究的生产商。该公司向全球科研人员提供全面的晶体研究试剂和相关实验耗材,同时提供晶体设计和合成方面的定制服务。Hampton Research公司以其先进的生物大分子结晶技术和广泛实用的产品线,不仅为全世界晶体研究人员的工作带来了便捷,而且也受益于科研人员的回馈不断发展自己,目前已成为晶体研究领域最受信赖的品牌之一。
上海金畔生物作为Hampton research品牌蛋白结晶产品的代理商,我们将竭诚为您服务,欢迎新老客户咨询。

Hampton research主要产品:

产品分类 特点描述
Crystallization Screens 用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液
Optimize Reagents 结晶级别盐类,聚合物,有机溶液或缓冲液
Crystallization Plates, Hardware & Accessories 结晶板(悬滴法和坐滴法,微量透析,微配液,自由界面扩散,凝胶以及无容器悬浮法)及其他配件
Cryocrystallography 低温晶体学耗材如Crystalcap system,cryoloops
Goniometer Heads&Supplies 测角器头和配件
Protein Crystallization Standards 结晶级别标准蛋白
Custom Shop

Crystallization Reagents

定制试剂盒和结晶溶液内的单一组分
StockOptions Kits 内含盐类,缓冲液和冷冻液的简便型试剂盒
Tools,Seeding&Resin 结晶用探针,结晶笔,seeding法结晶工具
Capillary Mounts & Supplies 毛细管,玻璃纤维, 蜡,黏合剂和密封剂

美国Hampton Research公司是世界上著名的蛋白质晶体试剂供应商,该公司的产品目录是由上海金畔生物科技有限公司提供,该目录分为12个大类和几十个小类。

Hampton蛋白质结晶试剂及耗材分类

第一类:Crystallization Screens   用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液

1.PCT Pre-Crystallization Test(PCT预结晶试验)

应用:结晶筛选,确定相应的样品浓度,PCT试验用来预结晶结晶筛选,以确定适当的蛋白质浓度

  1. Slice pH(PH切片)

应用:溶解度和结晶筛选

  1. Solubility & Stability Screen(溶解度和稳定性的屏幕)

应用:溶解性和稳定性屏幕的设计,以协助识别解决方案的条件,促进蛋白质的溶解性和稳定性,并尽量减少蛋白质沉淀。

  1. Index

应用:不同的试剂系统的结晶屏幕的蛋白质复合物,多肽,核酸,水溶性小分子。

  1. Crystal Screen(晶体屏幕)

应用:

主屏幕的可溶性肽,蛋白质,核酸,和水溶性小分子。稀疏矩阵的加法屏幕

5.PEG/Ion Screen & PEG/Ion HT Screen 用于可溶性蛋白的结晶

6.PEG/Ion 2 Screen?用于可溶性生物大分子结晶

7.Crystal Screen? & Crystal Screen? HT 用于蛋白质,复合物,缩氨酸,核酸以及水溶性小分子的传统的经典结晶试剂

8.Crystal Screen 2?用于蛋白质,缩氨酸,核酸以及水溶性小分子的结晶

9.Crystal Screen Lite?用于蛋白质,缩氨酸和核酸的结晶试剂

10.Crystal Screen Cryo?用于蛋白质,缩氨酸,核酸的结晶

11.Grid ScreenTM用于蛋白质的结晶,分为七小类。

12.Quik Screen?用于可溶性蛋白的结晶

13.Quik Optimize?快速优化试剂,与Quik Screen? 或 custom screen配套使用

14.Low Ionic Strength Screen?用于完整的单克隆抗体,单克隆抗体片段以及低离子浓度很少溶解的蛋白的结晶

15.Nucleic Acid Mini Screen?用于核酸片段的结晶化

16.Natrix?用于核酸,蛋白核酸聚合物的结晶

17.MembFac?& MembFac? HT用于膜蛋白的结晶

18.Additive Screen?增强或改变样品可溶性的试剂

19.Detergent Screen?去垢剂

20.Heavy Atom Screens重原子结晶试剂

21.Izit Crystal Dye?蛋白染色试剂,用于区分蛋白晶体和盐晶体

第二类:Custom Shop Crystallization Reagents  结晶试剂盒中单独的试剂

  1. Solubility & Stability Individual Reagents
  2. Slice pH Individual Reagents
  3. Ionic Liquid Screen Individual Reagents
  4. Proti-Ace & Proti-Ace 2 Individual Reagents
  5. PCT Individual Reagents
  6. Silver Bullets & Silver Bullets HT Individual Reagents
  7. Silver Bullets Bio & Silver Bullets Bio HT Individual Reagents
  8. Index • Index HT Individual Reagents
  9. PEGRx 1 Individual Reagents
  10. PEGRx 2 Individual Reagents
  11. SaltRx Individual Reagents
  12. PEG/Ion Individual Reagents
  13. Crystal Screen Lite Individual Reagents
  14. Crystal Screen Cryo Individual Reagents
  15. Crystal Screen 2 Cryo Individual Reagents
  16. Grid Screen Ammonium Sulfate Individual Reagents
  17. Grid Screen PEG 6000 Individual Reagent
  18. Grid Screen Sodium Chloride Individual Reagents
  19. Grid Screen PEG/LiCl Individual Reagents
  20. Quik Screen Individual Reagents
  21. Natrix Individual Reagents

第三类:Optimize Reagents 优化试剂

1.Optimize-Polymers聚合体

2.Optimize-Organics (Volatile) 挥发性有机物

3.Optimize-Organics (Non-Volatile)非挥发性的有机物

4.Optimize-Salts 盐类

5.Optimize-Buffers缓冲液

6.Optimize-Solubilizing Agents (NDSB) 溶解试剂NDSB

7.Optimize-Reducing Agent还原剂-TCEP氢氯化物

8.Optimize-Cryoprotectants

9.Optimize-Oils用于结晶的油类

10.Optimize-Silica Hydrogel硅胶

11.Optimize-LM Agarose低熔点琼脂糖

第四类:StockOptions Kits

  1. StockOptions Salt
  2. StockOptions pH
  3. StockOptions Buffer
  4. CryoPro

第五类:Crystallization Plates, Hardware & Accessories 结晶耗材

1.24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种

2.48 Well Crystallization Plates 48孔晶体板

3.72 Well Crystallization Plates72孔晶体板

4.96 Well Crystallization Plates 96孔晶体板

5.384 Well Crystallization Plates 384孔晶体板-用于坐滴的结晶

6.Cover Slides & Related Tools

7.Glass Sitting Drop Rods用于坐滴的结晶

8.Micro-Bridges?微桥-坐滴结晶的支撑物

9.Glass Plates – 3 and 9 Well3孔和9孔玻璃板

10.Sealants, Sealing Grease, Oils, Applicator密封油脂,油及其它器具

11.Sealing Films, Tapes, Mats & Covers

12.Microdialysis Buttons, Rods & Membranes微量渗析结晶化

13.Granada Crystallization Box

第六类:Tools, Seeding & Resin(结晶工具、树脂)

  1. Tungsten-carbide Glass Cutter
  2. X-Acto Gripster Knife
  3. Micro-Tools™ Set
  4. Micro-Tools II™ Set
  5. Forceps
  6. Crystal Probe™
  7. Crystal Pencil
  8. Seed Bead
  9. Seeding Tool

第七类:Cryocrystallography

  1. CrystalCap HT™ Systems
  2. CrystalCap Magnetic™ Systems
  3. CrystalCap™ Systems
  4. CryoLoops & MicroTubes
  5. Cryo Tools
  6. Canes, Sleeves, Coders & Boxes
  7. Dewars

第八类:Capillary Mounts & Supplies(毛细管座椅支架供应)

第九类:Goniometer Heads & Supplies(测角头及用品)

第十类:Xenon Derivatization(氙气衍生物)

第十一类:Labels & Pens(标签和记录笔)

第十二类:Protein Crystallization Standards(蛋白质结晶的标准)

Hampton代理,Hampton上海代理,Hampton北京代理,Hampton广州代理,Hampton总代理,Hampton一级代理,Hampton特约代理,Hampton现货上海金畔生物科技有限公司Hampton专业代理。

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理(活性荧光染料)   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理(糖蛋白分析产品)  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton 蛋白结晶优化试剂 Optimization Screens

Hampton 蛋白结晶优化试剂 Optimization Screens

1、Solubility & Stability Screen  蛋白特异性试剂优化溶解性和稳定性

Protein specific agents for optimization of solubility & stability  

2、Solubility & Stability Screen 2   离子缓冲液

Buffer, pH & ionic strength screen for optimization of solubility & stability

3、Slice pH    PH缓冲液

pH & buffer screen for optimization of crystals or sample solubility & stability

4、Additive Screen  96孔板添加剂试剂盒

96 compound screen for optimization of crystal size & quality

5、Silver Bullets • Silver Bullets Bio

Small molecule additive screen for optimization of crystal size & quality

6、Detergent Screen

Detergent screen for optimization of crystals or sample solubility & stability

7、Ionic Liquid Screen

Ionic liquid additive screen for optimization of crystal size & quality

8、StockOptions Buffer Kits

Titrated buffer sets for optimization of crystals or sample solubility & stability

9、StockOptions Polymer

n of crystal size & quality

10、StockOptions Salt

Salt reagent kit for optimization of crystal size & qualit

11、Polymer reagent kit for optimizatioy

Proti-Ace

In situ proteolysis kit protein for crystallization screening & optimization

12、Reductive Alkylation

Reductive alkylation kit for crystallization screening & optimization

13、Silica Hydrogel Kit

pH neutral silica hydrogel matrix crystallization

14、Low Melting Agarose

Agarose gel matrix crystallization

15、CryoPro

Water soluble cryoprotectant reagent set

16、Heavy Atom Screens

Heavy atom kits for multiple isomorphous replacement

17、I3C Phasing Kit

Produce heavy atom derivative of biological macromolecules for phasing